hager EE171 Quick Start Manual

hager EE171 Quick Start Manual Manual pdf 1 page image

1 6LE002831AProgramming :1. To start programming, press key“Prog”, the first program stepflashes.2. Set the first switching time with key “+”or “-”3. Use the “on/off” button to choose betweencircuit:ON and circuit OFF.ON = work authorization period.OFF = work banning period.4. Enter the settings by pressing“Prog” (short press).You must now choosethe days of the weekthat the settings apply to.5. With key “+” and “-”, display one after theother each day of the week and select withkey “on/off” if the program applies to thisday or not.Days to which the switching is to be appliedmust be visible at the bottom of the displaye.g. 1 2 3 4 5 visible, means switching willbe applied Monday to Friday.6. Press “Prog” to enter this program step.7. To adjust the time settingsas well as the assignments to thedays of the week ;Repeat operation 2 to 6 for furtherprogrammes. (maximum 20)If no buttons are pressed within 2 min.,the device switches back to automatic modewithout recording your settings.8. To record your settings andreturn to automatic mode press“Prog” for more than 2 seconds.The programmable light sensitive switch EE171 hastwo main functions:• a light sensitive switch comprising: Override selector switch to allow permanentsetting ON or OFF, auto or test mode. Lighting range selector. Potentiometer to set light level. Indicator to show output switching.• a programmer to establish the automaticoperating cycle.The programmer comprises 4 keys: on/off to choose whether the circuit is on or off Prog to set the program and scroll programsteps reset + and - to change settingsOn the display are indicated :A. the current timeB.the working status ON (authorization) orOFF (banning)C.The days to which the program applies.(1= Monday, 2 = Tuesday ...............7 = Sunday)Setting time and day:Press key + or -.A continuous pressing on this keys will scroll up ordown minutes, hours and then days.6LE002831AEE171Operating principle:The EE171 programmable light sensitiveswitch controls light sytems according to aprogram set by the user, depending on natu-ral illumination.- during the work authorization period, de-pending on wether the measured light levelis below or above the required level, it willbe switched on or off.- during the work banning period, the contactremains open, whatever the light level is.The light sensitive switch includes a built intime delay which avoid unnecessary switchingdue to temporary factors such as car beamsetc...Description:LuxT6:00 8:00 17:00 23:00ON ONOFF OFF OFF11 1012N51 2L66E0585a230 V 50 Hz16A 250V10 11 12AC1testauto200050Lux1005121277 88 99 1010 11116611 22 33 44 55127 8 9 10 1161 2 3 4 5on/off Prog+ To check your settings :In automatic mode :Press “Prog” repeatedly to display the day, thetime and the circuit status (ON or OFF).To switch back to automatic mode, press“Prog” for more than 2 sec.To reset the time switch :Press the “reset” button, the program will becancelled.z Programmable lightsensitive switchyMake sure the light sensitive switch isunplugged before connecting the cell.

/ 4

Related manuals for hager EE171