98 • SETTINGS Customer Service: 888-269-7477Using VCO to call a TTY UserVCO stands for Voice Carry Over, a service common in traditional relayservices in which callers speak for themselves and read typed responses. Ifyou dial 711 to call a TTY user through Relay, your CapTel phone willautomatically convert to VCO mode. This allows the Relay Operator to typemessages directly to your CapTel display screen.When placing a call through Relay, tell the Relay Operator that you want touse VCO. Then, everything the TTY user types will appear as typed messageson your display screen. You speak back to the TTY user via the Relay Operatorand through the CapTel handset, taking turns reading and speaking. Whenthe call is completed, press the Captions button to drop out of VCO mode.You can also turn VCO mode on/off in the Captions Settings menu.Updating Your CapTel PhoneOccasionally, changes are made to the CapTel 840 PLUS software. Your phonecan check whether new software is available and then perform an update asneeded over the telephone line. This process ensures you will always havethe latest technology for as long as you own your CapTel 840 PLUS.To update your CapTel 840 PLUS software:1. With the handset hung up,press the YES button to see theOptions menu.2. Press the DOWN arrow buttonrepeatedly until Settings ishighlighted.Press the YES button to select.OPTIONSDial from Phone BookAnswering MachineCall HistoryEdit Phone BookConversationsSettingsPress YES to select or press NO to exit OptionsSettings?
