OneStart

Menu

caenrfid Easy2Read qID R1240I Technical Information Manual

Page 1 preview
Page 2 preview
Page 3 preview
Page 4 preview
Page 5 preview
Page 6 preview
Page 7 preview
Page 8 preview
Page 9 preview
Page 10 preview
Page 11 preview
Page 12 preview
Page 13 preview
Page 14 preview
Page 15 preview
Page 16 preview
Page 17 preview
Page 18 preview
Page 19 preview
Page 20 preview
Page 21 preview
Page 22 preview
Page 23 preview
Page 24 preview
Contents
  1. Scope of Manual
  2. Table Of Contents
  3. Introduction
  4. Product Description
  5. Front panel
  6. USB connector
  7. Installation Notice
  8. Development kit
  9. Getting Started
  11. Connecting the qID reader
  12. qID R1240I Firmware Upgrade
  13. Firmware Upgrade
  14. qID R1240I Technical Specifications
  15. Technical Specifications Table
  16. Readable Barcodes
  17. Radiation Patterns
  18. qID R1240I Regulatory Compliance
  19. FCC Compliance
caenrfid Easy2Read qID R1240I Technical Information Manual Manual pdf 8 page image
qID R1240I Technical Information ManualUSB connectorA micro USB Type B socket connector is located in the bottom side of qID R1240I and can be used to connect thereader to an USB host port or to an AC/DC battery charger.In case the reader is connected to a standard USB port the battery charge is performed at 500mA max. (slow chargemode), in case it is connected to the AC/DC adapter charge current is 1A max. (fast charge mode).Please consider that when the reader is attached to a PC via USB cable, the battery recharge is active only with devicein stand-by mode (power LED blinking orange).AccessoriesCheck for the supplied accessories below:No. 1 USB cable No. 1 Power supplyNo. 1 strapFig. 1.4: qID R1240I Accessories
/ 24
This manual is suitable for:
Easy2Read qID R1240I
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved