baltur BTL14 Instruction

Also see for BTL 14: Manual instructions for use INSTALLATION, USE AND MAINTENANCE INSTRUCTION MANUAL INSTALLATION, USE AND MAINTENANCE INSTRUCTION MANUAL Instructions

baltur BTL14 Instruction Manual pdf 23 page image

21ONE STAGE LIGHT OIL BURNERSN° 0002934140Rev. 30/03/2004MAINTENANCEMost components can be inspected by removing the hood. To inspect the head you must disassemble the component-carryingplate which can be hung on hung on the burner body in two different positions to make work as practical as possible. Themotor, transformer and solenoid valve are connected via a connector while the photo-resistor is push-locked into place.1) Undo the lid screw “A” to gain access to theinterior of the burner.2) Undo the 6 screws “B” of the plate, as indicated, inorder to access nozzle, electrodes and fun.3) The plate must be hung up as illustrated in fig. C.4) The deflector disk can be removed byloosening the screw “C”.