Installation Manual of Network Camera2Safety InstructionThese instructions are intended to ensure that the user can use the product correctly to avoiddanger or property loss.The precaution measure is divided into ‘Warnings’ and ‘Cautions’:Warnings: Serious injury or death may be caused if any of these warnings are neglected.Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.Warnings Follow these safeguards toprevent serious injury or death.Cautions Follow these precautions toprevent potential injury or materialdamage.Warnings: Please adopt the power adapter which can meet the safety extra low voltage (SELV) standard.And source with DC 12V or AC 24V (depending on models) according to the IEC60950-1 andLimited Power Source standard. If the product does not work properly, please contact your dealer or the nearest service center.Never attempt to disassemble the camera yourself. (We shall not assume any responsibility forproblems caused by unauthorized repair or maintenance.) To reduce the risk of fire or electrical shock, do not expose this product to rain or moisture. This installation should be made by a qualified service person and should conform to all the localcodes. Please install blackouts equipment into the power supply circuit for convenient supplyinterruption. Please make sure that the ceiling can support more than 50(N) Newton gravities if the camera isfixed to the ceiling. If the product does not work properly, please contact your dealer or the nearest service center.Never attempt to disassemble the camera yourself. (We shall not assume any responsibility forproblems caused by unauthorized repair or maintenance.)