Menu
acid rain technology maestro Quick Reference Manual
Also see for Maestro: Manual
  |
maestroclocked modulation controller firmware version 1.065mA +12 / 18mA -12 20 HP / 25mm Deep Reverse Power Protection Made in USAWe guarantee our products to be free from manufacturing defects (materials or workmanship) for one year from the date of theoriginal retail purchase (receipt or invoice required). For more information please visit www.acidraintechnology.com.About MaestroMaestro is a 6 channel clocked modulation controllerinspired by the automation lanes found in digital audioworkstation software, brought into eurorack and madeplayable and performable. Maestro will push and pullthe parameters of your other modules with rapid orslowly evolving voltages, always in perfect sync witheachother and the rest of your system.HardwareMaestro is comprised of 6 identical channels, each withan output (4), gate or trigger input (5), output state LED(6) and channel button (19). Maestro’s tempo isdisplayed in 4 pulses per quarter note on the clock LED(3) and the module can be externally clocked and reseton inputs (2). Maestro’s clock and reset signals arepresent on outputs (1).Each channel is assigned a clock division ormultiplication from the timing buttons (15) that can bemodified by the triplet (16) or slow (17) buttons. Seediagram of timings on next page.Each channel is assigned a waveform from thewaveform buttons (8) that can be modified by thesmooth (12) and bipolar (13) buttons. Bipolar changes achannel’s output between 0 to +5V and -5V to +5V. Seediagrams of waveforms on next page.Mute (18) will mute or unmute selected channels.Chain (14) enters the chain menu where multiplewaveforms can be sequenced in a row. See descriptionon next page.Clock (11) enters the clock settings menu. Seedescription on next page.Save (9) and load (10) enter the save and load menuswhere channel settings can be saved and recalled fromthe micro SD card (7). See description on next page.-12 redMaestro requires a +12V / -12v power supply with a 2x5 pin ribbon cable (included). The red line of the ribboncable must be aligned with the -12V marking next to the module’s power header and on your case’s powerdistribution board. Maestro draws 65mA from the +12 rail and 18mA from the -12 rail. Please ensure you haveenough power available before installing.maestroreset I II III IV V VIclockmute1/2I II III IV Vtriplet slowsmooth bipolarVIchainclock1/4 1/8 1/16high low square random1/32save loadQuick Reference Guidefull manual available on acidraintechnology.com7456123189 10 1112 13 1416 1715819 |
Related manuals for acid rain technology Maestro
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved