Page 26We take care of it.9.10 ParametersThe individual controller parameters are described in detail below.Figure 9-9 Setting the regulator parameters Select the Parameter menu (See Section 9.9 Overview display). To select sub items, press the up or down key. Press the Enter key.Configuration: PIN input by pressing the up/down and left/right keys. Press Enter to confirm the PIN. Set the parameters by pressing the up/down and left/right keys. Press Enter to confirm the selection.On delivery the PIN is set to 0000 (four times zero)NOTE: The PIN can be changed as described in section 11 IT-Security.
