Menu
a/d/s/ 245ix Owner's Manual
                  | |
featuresMolded woofer basket - The backbone of any good woofer is its basket. It provides the properalignment and support structure for the magnet and moving parts while the very thin braces guaranteea minimum of early reflections off the basket that would be ordinarily transmitted as sonic colorationsthrough the cone.Woofer cone - Anodized polypropylene provides the right combination of rigidity and low moving massfor low distortion and excellent frequency response.Vented voice coil - Magnet cooling vent construction enhances power handling capabilities of thewooferExtended center pole - Woofer magnet geometry provides a symmetrical magnetic pattern to reduce THD.Tweeter - Ultra-light silk dome design is treated with polymer compound to control all non-linearresonances.Multi-mount tweeter - The following tweeter mounting options are supplied to mount the ferrofluidcooled neodymium tweeter: coaxial, surface, angled surface, flush, or angled flush.Tweeter level control - A three-position switch adjusts the volume of the tweeter with respect to themidrange.Tweeter Phase switch - A two-position switch which allows 0° or 180° phase difference between thetweeters and midranges.Bi-amplifiable/ bi-wirable - The passive crossover supplied with this system is bi-amplifiable or bi-wirable; typically only available in high quality audiophile home loudspeakers.Solid state tweeter protection - Advanced protection circuitry provides protection for the tweeteragainst overpowering or amplifier clipping.cautionsStudy your automobile thoroughly before you drill or cut any holes. Take extra care when working neargas tanks, gas lines, brake or hydraulic lines and electrical wiring.Wear eye and ear protection when using power tools. Keep the woofers and tweeters away from metalfilings and shavings. Once foreign objects are stuck to the magnets or tweeter dome, it will be virtuallyimpossible to remove them. Keep the tweeters in their protective bags until final mounting to prevent anypossibility of metal dust or chips from passing through the grille and accumulating on the dome.Exercise caution when working with the ix series with the grille removed. A slip of the hand with ascrewdriver or other tool can result in irreparable damage to the cone. Do not touch the cone.Do not install the components where they will be subject to excessive heat, moisture or dust, or wherethey will be kicked or repeatedly bumped or brushed.Make absolutely sure that the woofer is connected to the lowpass output and the tweeter is connectedto the highpass output of the crossover network. If these connections are reversed, low-frequency signalswill be fed to the tweeter without fuse protection. In this case, the tweeter may be damaged, suchdamage is not covered by the warranty.2 |
Related manuals for a/d/s/ 245ix
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved