Zodiac VORTEX 3 Instructions For Installation And Use Manual

Also see for Vortex 3: Instructions for installation and use Owner's manual

Contents

Zodiac VORTEX 3 Instructions For Installation And Use Manual Manual pdf 13 page image

8 / COMPLIANCEThis appliance has been designed and built according to the following standards:The Electromagnetic compatibility directive: 2004/108/EC and the normsEN 55014-1: 2000 +A1:2001 +A2:2002EN 55014-2: 1997 +A1:2002IEC60335-2-41 5 (3rd edition) + A1 : 2004IEC 603335-1: 2001 (4th edition) (incl. corr1: 2002) + A1 2004 (incl. corr1: 2005) + A2: 2006(incl. corr: 2000)The low voltage directive: 2006/95/EC and the norms:EN 60335-1: 2002 + A1:2004 + A2:2006 +A11:2004 + A12:2006EN 60335-2-41: 2003 +A1:2004Relative to which it is compliant.The product has been tested under normal conditions of use.SAFETY STANDARDS:Vortex™ 3 and Vortex™ 4 has been classified as compliant to the relevant requirements ofIEC 60335-2-41 by the ETL.R&TTE COMPLIANCE: VORTEX TM 4BZT - ETS certification Gmbh, attests, under its responsibility that the product ERONE O24Amanufactured by ELPRO INNOTEK s.p.A, Via Piave, 23 - 131020, to which this current attes-tation refers, conforms to the corresponding norms and normalisation documents;> EN 300 220-3 V1.1.1 (2000-09): electromagnetic compatibility and radiofrequencyspectrum (ERM), short range devices (SRD) ; radio equipment to be used within the frequencyrange between 25 MHz and 1000 MHz at power levels of up to 500 mW.Part 3: Harmonised EN standard covering the essential requirements, following article 3.2 ofthe R & TTE Directive.> EN 301 489-03 (2000-07): electromagnetic compatibility and radiofrequency (ERM) ;electromagnetic compatibility standards (EMC) for radio equipment and services.Part 3: Specific conditions applying to short range devices (SRD) operating at frequenciesbetween 9kHz and 40 GHz.> EN 60 065 (1998): audio, video and similar electronic devices. Safety requirements.9 / GENERAL SPECIFICATIONSControl box supply voltage: 220-240 VAC ; 50 Hz Weight of robot: 9.5 kgRobot supply voltage: 30 V DC Packed weight: 19 kgInstalled load: 150 W max Theoretical width cleaned: 270 mmCable length: 18 m or 21 m (VortexTM 4) Pump output: 16m 3 / hRobot size (WxDxH): 43 x 48 x 27 cm Cycle lengths: 1.30 hrs, 2.30 hrsPack size (WxDxH): 58 x 58 x 59 cmThe manufacturer reserves the right to modify these specifications without notice.Although the Vortex TM 3 & Vortex TM 4 cleaning robots have been tested in a large variety ofswimming pools, Zodiac can not be held responsible in the case of a non-perfect adaptation ofthe robot to a particular swimming pool.242-Notice CO ANG.qxd 13/09/10 9:12 Page 24

/ 13

Related manuals for Zodiac Vortex 3