Zodiac OC 3400 Instructions For Installation & Use

Also see for OC 3400: Installation and user manual Instructions for installation and use Manual

Contents

Zodiac OC 3400 Instructions For Installation & Use Manual pdf 11 page image

10H0426500.C - EN - 2016-013.6 I Ending the cleaning cycle• Only use the handle to remove the cleaner from the water. Do not lift the cleaner using thefl oating cable.• Do not leave the device to dry out in sunlight after use.• Store all the elements away from sunlight, dampness and bad weather.• Switch off the device by pressing .• To bring the cleaner to the edge of the pool, pull on the floati ng cable.• When the cleaner is within arm's reach, pick it up by the handle and lift it gently out of the pool so that the water itcontains drains into the pool (see image and ).• Place the cleaner verti cally at the location provided on the trolley (depending on the model) for it to dry out quickly(see image ).• Then store it with the command box away from sunlight and any splashing. A protecti ve cover is available as an option(see image ).Tip: prevent the fl oating cable from becoming too entangledThe cleaner's behaviour is strongly impacted by the tangling of the cable. A cable which is correctly untangledwill guarantee better coverage of the pool.• Untangle the cable and lay it out in the sun so that it returns to its original shape.• Then wind it up carefully and place it on the trolley handle (depending on the model) or on a fixedsupport.❹ Maintenance• The device must be cleaned regularly using clean or slightly soapy water. Do not use any solvents.• Rinse the device generously using clean water.• Do not let your device dry in the sun by the pool.Tip: replace the fi lter and the brushes every 2 yearsYou are recommended to change the filter and the brushes every 2 years to preserve the integrity of thedevice and guarantee optimum performance.EN