Zip VP103 Instructions Manual

Also see for Varipoint II VP103UB: Installation instructions & user manual Installation, maintenance and user instructions Installation, maintenance & user instructions

Contents

Zip VP103 Instructions Manual Manual pdf 10 page image

2 The Zip Varipoint is an unvented electric water heater and a competentinstaller, familiar with unvented systems, should carry out all servicing andmaintenance.3 Do not remove the cover whilst the unit is connected to the electricalsupply.4 The over temperature cut-out is located beneath the housing cover.5 Do not reset the over temperature cut-out until the cause of its operationhas been diagnosed and necessary repairs undertaken.6 Do not use the water heater if it is suspected of being frozen. Switch offthe electrical supply if water ceases to flow and do not switch on againuntil a competent person has has checked it is safe to do so.7 The heater should be visually inspected regularly. This is particularlyimportant if the heater is located in a cupboard, roof space or any otherconcealed location. If there is any sign of leaks or seepage the heatershould be isolated from the water supply and switch off until a competentperson has investigated the cause.8 Do not block or restrict the discharge from any safety valve fitted.9 Do not tamper with any safety valve fitted.10 If water discharges from any safety valve, switch off the electrical supplyto the unit, isolate the water supply and contact a competent installerfamiliar with unvented systems.11 Please note that lime scale deposits form more readily at highertemperatures.12 The heater is not guaranteed against damage or failures caused by theformation of lime scale.12 Zip Varipoint II Installation, Maintenance and User Instructions - June 2004

/ 13

Related manuals for Zip Varipoint II VP103UB