ZiLOG eZ80AcclaimPlus! User Manual

Also see for Zdots eZ80AcclaimPlus: User manual

Contents

ZiLOG eZ80AcclaimPlus! User Manual Manual pdf 19 page image

UM024401-0412 Running the Sample Starter ProjecteZ80AcclaimPlus! Development KitUser Manual93. With the USB A (male) to Mini-B cable, connect Port P3 on the eZ80AcclaimPlus!Development Board to a USB port on the development PC to apply power to theDevelopment Board, as highlighted in Figure 5.To use the USB port as a power source, adjust the shunt on J12 to the 1–2 position.Running the Sample Starter ProjectA sample starter program provided on the ZDS II CD-ROM demonstrates how to writeproper code for the eZ80AcclaimPlus! Development Board. The starter program is writtenso that it will default to the UART-to-USB Port P3 on the Board. The program writes a fewcharacter strings either to this port, or to the simulated UART output window when run-ning the Simulator Debug Tool (see the Viewing the Starter Project Output via the ZDS IIInstruction Set Simulator section on page 11). Before running the starter program, how-ever, the eZ80AcclaimPlus! Development Board must be connected to your PC.After you create your own application program, you can use ZDS II to download the codeyou created into eZ80F91 memory for testing and debugging.Figure 5. USB-to-UART Port 3 ConnectorNote: