ZiLOG Z8 GP ZGP323 User Manual

Also see for Z8 GP ZGP323: User manual

Contents

ZiLOG Z8 GP ZGP323 User Manual Manual pdf 1 page image

ZiLOG Worldwide Headquarters • 532 Race Street • San Jose, CA 95126Telephone: 408.558.8500 • Fax: 408.558.8300 • www.ZiLOG.comIntroductionThank you for purchasing the ZiLOG Z8 GP In-Circuit Emulator (ICE) and DevelopmentPlatform, ZGP323ICE15ZEM. The Z8 GP ICE provides Z8 GP family chip emulationwith a trace and event system for program debugging using ZDS II development tools.Once your code is complete, use the included OTP programming module to burn yourdesign to OTP devices.This startup guide tells you how to:1. Install ZDS II software.2. Configure the Z8 GP ICE for connection to your PC.The kit includes a 28-PDIP target POD and programming adapter. TargetPODs and adapter support for other packages must be ordered separately. Seesection “Adapter Kit Ordering Information” on page 23 for details.3. Use a target POD to connect the Z8 GP ICE to a target board such as the Z8 GPZGP323 evaluation board (included) with a 20-, 28-, or 40-PDIP socket. (Convertersfor 20- and 28-SOIC and 20-, 28-, and 48-SSOP sockets are available in the adapterkits described on page 23.)4. Connect the Z8 GP ICE to a supplied OTP programming module.5. Use the supplied OTP programming module with ZDS II software to program a 20-,28-, or 40-PDIP Z8 GP family device. (Adapters for 20- and 28-SOIC and for 20-, 28-and 48-SSOP packages are available in the adapter kits described on page 23.)6. Run a demonstration program to verify proper operation, illustrate basic operation ofthe trace and event system, and burn a Z8 GP OTP device using the OTP program-ming module.Software RequirementsTable 1 lists the PC requirements for running ZDS II.Note:ZGP323ICE15ZEMZ8 GP™ ZGP323 In-Circuit Emulatorand Development PlatformUser Manual UM019301-0505