Technical SpecificationsADSL2+/ReachDSL Single Port ModemDimensionsn 1.2" H x 6" W x 4.4" D (3.05cm H x 15.24cm Wx 11.8cm D)Weightn 1.5lbs (shipping weight)Powern Input: 100-240 VAC, 50/60 Hzn Output: 2V DC, 1.5AInterfacesn DSL Line: RJ11n Phone: RJ11 (with integrated phone filter)n Ethernet: 10/100Base Tn USB 1.1Standards Supportn ATM:- RFC 1483/2684 Multiprotocol Encapsulationover ATM- Up to 8 PVCs, UBR, CBR, VBR- OAM F5, F4 Loopbacksn PPP- RFC 2364 PPP over ATM- RFC 2516 PPP over Ethernet- PAP/CHAPn Routing/Bridge- IPv4, TCP, UDP, ICMP, ARP, RARP- RIPv1, RIPv2- Static Routing- DHCP Server/Client/Relay- DNS Proxy- UPNP- IGMP v1,v2 Snooping and Proxy- IEEE 802.1d transparent bridgingn Security- NAPT- Stateful Inspection Firewall- PPP with PAP/CHAPProtocol Supportn ANSI T1.413 (Full Rate ADSL)n ITU G.992.1 (DMT)n ITU G.992.2 (G.lite)n ITU G.992.3 (ADSL2)n ITU G.992.5 (ADSL2+)n ITU G.994.1 (G.hs)n ITU G.997.1n Zhone ReachDSL 2.2Managementn Web based User Interfacen Firmware Upgradeable via HTTPn Telnet Servern TFTP Server and Clientn SNMPBandwidth/Distancen Downstream Speeds up to 24 Mbps usingADSL2+ (2.2 Mbps with ReachDSL)n Upstream speeds up to 2 Mbps with ADSL2+ (1Mpbs with ReachDSL)Regulatory Compliancen FCC Part 68n FCC Part 15n CEn ULn TUVn ReachDSL 2.2 Spectral Compliance:- ANSI T1.417- ANSI T1.413- UK ANFP- ETSI TR101 830-1- Approved for all loops in Japan by the TTCOperating Requirementsn Temperature: 32F to 104F (0C to 40C)n Non-operating temperature: -4F to 149F (-20Cto 65C)n Humidity: 5% to 95%, non-condensingOrdering Information6381-A4-200 ADSL2+/ReachDSL CPE Router (TI), 10/100BaseT, N.A.6381-A4-300 ADSL2+/ReachDSL CPE Router (TI), 10/100BaseT, U.K.6381-A4-302 ADSL2+/ReachDSL CPE Router (TI), 10/100BaseT, EURO6381-A4-600 ADSL2+/ReachDSL CPE Router (TI), 10/100BaseT, Japan18 May 2011 13:39:44