9Zeus AppolloTM –WIFIKIT User Manual2.1 UnpackAfter unpacking the box, please check that all components are present as shown in the listbelow. Contact the manufacturer immediately if you find any damage, missing componentsor if it is the wrong model..Serial Name Quantity ModelA PV data collector 1 WIFIKITB Power supply adapter 1 FY0502000C Screw 2 --D expanded rubber tube 2 --E Manual 1 --2.2 The installation of the data collector2.2.1 Wall-mounted installation① Mark two horizontal round holes at a distance of 69mm in the selected position② Drill two φ6mm holes in the marked position, the depth of the hole should not be less than30mm③ Punch the expanded rubber tubes into the holes lightly with a rubber hammer④ Twist two screws into the expanded rubber tubes, the screws head exposed wall about6mm⑤ Hang the PV data collector WIFIKIT on the screws,hold the metal part of the antennaand rotate the antenna to the preferred positionPicture 2.2.1Picture 2.1.1