Menu
Zetta Z82 Quick Start Manual
  |
Zetta Z82 Security Camera Quick Start Guidewww.zetta.com.hkOverviewCongratulations on your purchase of Zetta Z82 security camera!Zetta Z82 is an intelligent security camera with multiple triggering methods and multi autoon/off modes. The camera comes with a built-in rechargeable battery which can record up to9 hours continuous video and audio during typical use and standby for 1 month when motiontriggering (in max battery mode) is enabled. By plugging in a 5V DC adapter (not included),it can achieve max 156 hours circular recording for surveillance on a 256GB microSD card.** Actual life and performance may vary depending on usage and settings; battery not replaceableFeaturesCircular recording – loop back recording once memory card is fullTime stamp – put time stamp on videoMotion-triggered recording – select to record only when motion is detected, 1 monthstandby (in max battery mode), work through glass and windowAuto gapless split file – gaplessly split files for every 10 / 15 / 20 minutesOrientation – use when the camera is turning up-side-downFull HD 1080p resolutionConfigurable video quality – high / medium / lowSupport max 256GB microSD(TF) card (for better performance, use card larger than8GB, class 4 or above, and before use, format the card to FAT32 format only)Package ContentsPlease unpack your intelligent security camera and check that the following are included:Zetta Z82 security cameraUSB 2.0 CableQuick Start GuideNote: The PC configuration tool “Camera Widget” is not included in the package, pleasedownload it from http://www.zetta.com.hkChargingThe camera comes with an internal rechargeable battery. To use the camera for the first timeor not using the camera for a long time, please fully charge the battery for at least 8 hoursand resync the time by using the Camera Widget (see section “PC Configuration Tool”). Youcan charge your camera through the USB port of your computer, or an portable power bank,or a 5V DC adapter or car charger.To charge the battery through USB port, connect the USB cable to the USB port of thecomputer and the camera. For details, please see the status below. The camera will functionas a mass storage device, you will not be able to record video at this moment.To charge the battery through power bank, DC adapter or car charger, connect the chargerto the camera. For details, please see the status below. You will be able to record video whilecharging, depending on the mode you set.RecordingThe power button is located at the back side of the camera. It can turn the camera on or off.Start RecordingInsert a FAT32-formatted microSD card (please see “Format Card” on how to format thecard). Press and hold the Power button until the green LED is on (approximately 3 seconds),and then release the button. When you see the green LED flashing, the camera is recording.Otherwise, please see the status below.Stop RecordingPress and hold the Power button until the orange LED is off (for approximately 3 seconds).WARNING: Turn off the camera before removing the microSD card!StatusWithout external chargerGreen LED on: camera is booting upGreen LED flashing: normal recordingGreen / Red LED intermittent flashing: battery low and recordingRed LED on: no card, card fail, battery low or card full (not in circular recording)Connecting to an external chargerOrange LED on: charging but no recordingGreen LED on: charging completed but no recordingGreen LED flashing: charging completed and recordingGreen / Orange LED intermittent flashing: charging and recordingRed LED on: no card, card fail or card full (not in circular recording)Connecting to computerOrange LED on: chargingGreen LED on: charging completedZetta Z82 at a GlanceCameraMotion sensor USBMicrophoneFirmware upgradeor Format cardResetmicroSDPower |
Related manuals for Zetta Z82
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved