Zeta Premier M+ Installation Manual

Also see for Premier M plus: User manual, maintenance guide & log book Log book & certificates User manual & maintenance guide

Contents

Zeta Premier M+ Installation Manual Manual pdf 11 page image

PREMIER M PLUS INSTALLATION MANUALApproved Document No: GLT.MAN-111 PAGE 10Issue : 2.8 Author: NJ Date: 23/07/20126. FIELD DEVICE TERMINATION6.1 TERMINATING THE DETECTION AND ALARM (SOUNDER) CIRCUITS.All cables entering the enclosure should have cable glands fitted, and their earth screens connected to the Earth bar as shown. Thiswill ensure a good EMC performance. The Detection and Sounder circuits should be connected to the appropriate connector blockon the Termination PCB as shown in Figure 6 below.(For detailed detection and alarm circuit wiring diagrams, please refer to pages 6 and 7)Figure 6: Detector and Sounder Circuit Connection.6.2 AUXILIARY INPUT AND OUTPUT TERMINATIONSConnect auxiliary input and output cables to the appropriate connector block terminals on the Termination PCB (See Page 18).Screened cables should be terminated at the earth bar, as per figure 6.For a full description of the inputs and outputs available on the Premier M Plus range of Fire Panels, including typical wiringdiagrams please refer to page 8.