Zepro ZHD 1500 Service Instruction

Also see for Z 15: Installation instructions User manual

Contents

Zepro ZHD 1500 Service Instruction Manual pdf 22 page image

2,75,103, 84,91,6SZFT/SZFTN/SZFTS 200-160IE-010119(View from behind.)The Tail lift has ten lubrication points: Four on the cylinders, four on the tie rods and two forthe lift arm, (See the encircled images below with black frames). In these images showslubrication points on the Tail lift right hand and is represented with black numbers (1-5).On the left side of the lift are the lubrication points mirrored and are represented in text andimages below with red numbers (6-10)NOTE! The axles between the lift arm and the support frame should not be lubricated atall, not even initial lubrication. Therefore, lack of lubrication nipples.The slide system has eight lubrication points, (see the section for Slide system).Raise the lift to maximum (see picture atright). Lubricate all the grease points in thismode.Lowering the lift in the approximateposition shown in the picture to the right.Lubricate all points except 3 and 8 onceagain.Lowering the lift to the ground as shown inthe picture to the right. Lubricate all pointsexcept 3 and 8 once again.

/ 23

Related manuals for Zepro Z 15