Menu
Zencontrol zc-controller Instructions Manual
  |
DimensionsMounting options DIN rail (35 mm)Dimensions 92.5 / 72 / 62 mm457292.562InstallationRemove the product from the box and inspect it for any damage. If youbelieve the product to be damaged or otherwise unsound, do not installthe product. Please pack it back into its box and return it to the place ofpurchase for replacement.If the product is satisfactory, proceed with the installation:1 Ensure safety warnings are adhered to.2 Mount the DALI application controller on DIN rail inside a mainsrated enclosure as shown in fig 1. To remove from DIN rail, releasethe clip mechanism with a flat blade screw driver, as per fig 2.3 Wire the DALI application controller as per fig 3.1 2Click*Clip mechanismDIN railSpecificationsSupply voltage 230 V ~ 50 HzControl system DALI-2DALI line current 2 mAEthernet 10 / 100 Ethernet portWiring 1 - 4 mm 2Strip 6 - 7 mmOperating temperature 0 to 45°CMaterial PCClassification Class IIIngress protection IP20Product rangeOrder code Descriptionzc-controller DALI-2 application controller and EthernetDALI gatewayWiring diagram3LNDADA10 / 100 EthernetWire preparation1 - 4 mm26 - 7 mmSafety information■ This product must only be installed by a licensed electrician.■ Before commencing installation turn off and isolate theelectrical supply.■ There are no user serviceable parts, attempting to service anypart of the product will void the warranty■ DALI is not SELV and as such should be treated as LV.■ As the installer, it is your responsibility to ensure you complyto all relevant building and safety codes. Refer to applicationstandards for the relevant rules.■ When the installation is complete, leave this manual with thebuilding’s owner for future reference.System overviewWallplatezc-controllerzc-psuDALI luminaireEthernetDALI 2.0LN L N LNzc-relayLoadLLʼinLʼoutN LNzc-switchzc-pirL NDA DAN LL′outL′ inDA DADALI-2 application controller zc-controller |
Related manuals for Zencontrol zc-controller
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved