Zavio D5110 User Manual

Also see for D5110: Quick installation guide

Contents

Zavio D5110 User Manual Manual pdf 34 page image

D5110/D5111/D7110 User Manual31Use the following IP address: Select this option when the fixed IP address is set.IP address: Enter the IP address of the device.Subnet mask: Enter the subnet mask.Default gateway: Enter the default gateway. Use the following DNS server address: Select this when you set the fixed addressPrimary DNS server: Enter the IP address of the primary DNS server.as theIP address of DNS server.Secondary DNS server: Enter the IP address of the secondary DNS server, ifnecessary. HTTP port number: Select 80 in general situations. If you want to use a port numberother than 80, select the text box and enter a port number between 1024 and 65535.When you have set the HTTP port number to a number other than 80 on the NetworkSetting screen in the Setup Program, access the device by typing the IP address of thedevice on the web browser as follows: Example: when HTTP port number is set to2000 http://192.168.1.100:2000/Note: The IP Camera needs to be rebooted after it finishes changing the network settingcompletely.Note: If you connect the IP Camera with your computer directly, the default network domainof camera is 192.168.1.xx6.3.2 PPPoEIf your ISP provides Dynamic IP with authentication by username and password, type allPPPoE information in this part. When using the PPPoE function, you need to turn on theDDNS or IP Notification function at same time.