Menu
Zanussi ZOD35611XE User Manual
                    |
WARNING! Be careful when youremove the door from the appliance.The door is heavy.1. Open the door fully.2. Fully lift up the clamping levers (A) on the twodoor hinges.AA3. Close the door until it is at an angle ofapproximately 45°.45°4. Hold the door with one hand on each side andpull it away from the appliance at an upwardsangle.5. Put the door with the outer side down on a softcloth on a stable surface. This is to preventscratches.6. Hold the door trim (B) on the top edge of thedoor at the two sides and push inwards torelease the clip seal.12BCAUTION! Rough handling of theglass, especially around the edges ofthe front panel, can cause the glass tobreak.7. Pull the door trim to the front to remove it.8. Hold the door glass panels on their top edgeone by one and pull them up out of the guide.9. Clean the glass panel with water and soap. Drythe glass panel carefully.When the cleaning is completed, do the abovesteps in the opposite sequence. Install the smallerpanel first, then the larger and the door.WARNING! Make sure that theglasses are inserted in the correctposition otherwise the surface of thedoor may overheat.REPLACING THE LAMPPut a cloth on the bottom of the interior of theappliance. It prevents damage to the lamp glasscover and the cavity.WARNING! Danger of electrocution!Disconnect the fuse before youreplace the lamp.The lamp and the lamp glass covercan be hot.1. Deactivate the appliance.2. Remove the fuses from the fuse box ordeactivate the circuit breaker.The back lampThe lamp glass cover is at the back ofthe cavity.1. Turn the lamp glass cover counterclockwise toremove it.2. Clean the glass cover.3. Replace the oven lamp with a suitable 300 °Cheat-resistant oven lamp.Use the same oven lamp type.4. Install the glass cover.16 |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved