TroubleshootingProblem Possible cause RemedyThere is no spark when lightingthe gas• There is no electrical supply • Make sure that the unit is con-nected and the electrical supplyis switched on.• Control the fuse. If the fuse isreleased more than one time,refer to a qualified electrician.• Burner cap and crown areplaced uneven• Make sure that the burner capand crown are in correct posi-tions.The flame is blow out immediatelyafter ignition• Thermocouple is not heatedsufficient• After lightning the flame, keepthe knob pushed for approxi-mately 5 seconds.The gas ring burns unevenly • Burner crown is blocked withfood residues• Make sure that the injector isnot blocked and the burnercrown is clear of food particles.8 www.zanussi.com