Zanussi ZF-1214DC Instruction Manual

ASSEMBLY● Carefully unpack the appliance and remove all the packaging materialsattached to your Fan. Pick out the Motor housing (7), remove the Polefixing nut (13) out of the Supporting pole (11). Align and insert theSupporting pole (11) into the hole of the Base (12), fasten it with the Polefixing nut (13).● Remove the Blade locking cap (2) and Guard knob (4) from the Motorshaft (6). Assemble the Rear grille (5) onto the Motor housing (7) tomatch with the three fixing pins and make sure the carrying handle atthe top. Fixing it by the Guard knob(4).● Assemble the Blade (3) on the Motor shaft (6) and secure it with Bladelocking cap (2).● Put the Front grille (1) onto the Rear grille (5), settle it by the guardfixing clip then fasten it with the Safety screw (14).OPERATIONUnwind the power cable and Position the unit on a level, dry and flatsurface where the air outlet grilles cannot be obstructed. Position theappliance at least 30 cm away from walls or obstacles.Connect and ensure that the plug and the socket fit well.Select the desired speed setting by rotating the Rotary switch. There are3 speeds : 0 (Off), 1 (Low Speed), 2 (Medium Speed), 3 (High Speed)Push the Oscillating knob (8) for oscillation and pull the Oscillating knob(8) for fixed position.The airflow can be adjusted upward or downward by simply moving theMotor housing (7) up or down.Warning : Never touch the Blade with your hand or any other objectswhen the Fan is operating.1. Front grille2. Blade locking cap3. Blade4. Guard knob5. Rear grille6. Motor shaft7. Motor housing8. Oscillating knob9. Rotary switch10. Power cord & plug11. Supporting pole12. Base13. Pole fixing nut14. Safety screw

/ 3

Related manuals for Zanussi ZF-1214DC