Zanussi ZEV6332FBA User Manual

Also see for ZEV6332FBA: User manual User manual

Contents

Zanussi ZEV6332FBA User Manual Manual pdf 8 page image

To remove the dirt:1. – Remove immediately: melted plastic,plastic foil, and food with sugar. If not,the dirt can cause damage to the appli-ance. Use a special scraper for theglass . Put the scraper on the glass sur-face at an acute angle and move theblade on the surface .– Remove after the appliance is suffi-ciently cool: limescale rings , waterrings, fat stains, shiny metallic discolora-tions. Use a special cleaning agent forglass ceramic or stainless steel.2. Clean the appliance with a moist cloth andsome detergent.3. At the end rub the appliance dry with aclean cloth.TroubleshootingProblem Possible cause RemedyYou cannot activate the applianceor operate it.The appliance is not connected toan electrical supply or it is connec-ted incorrectly.Check if the appliance is correctlyconnected to the electrical supply(refer to connection diagram).Activate the appliance again andset the heat setting in less than 10seconds.You touched 2 or more sensorfields at the same time.Touch only one sensor field.There is water or fat stains on thecontrol panel.Clean the control panel.An acoustic signal sounds and theappliance deactivates.An acoustic signal sounds whenthe appliance is deactivated.You put something on one or moresensor fields.Remove the object from the sen-sor fields.The appliance deactivates. You put something on the sensorfield .Remove the object from the sen-sor field.The residual heat indicator doesnot comes on.The cooking zone is not hot be-cause it operated only for a shorttime.If the cooking zone operated suffi-ciently long to be hot, speak to theservice centre.You cannot activate the outer ring. Activate the inner ring first.The sensor fields become hot. The cookware is too large or youput it too near to the controls.Put large cookware on the rearcooking zones if necessary.comes on. The Automatic Switch Off oper-ates.Deactivate the appliance and acti-vate it again.comes on. The Child Safety Device functionoperates.Refer to the chapter “Daily Use”.and number comes on. There is an error in the appliance. Disconnect the appliance from theelectrical supply for some time.Disconnect the fuse from the elec-trical system of the house. Con-nect it again. If comes onagain, speak to the service centre.8 www.zanussi.com