Zanussi ZEC40 Instruction Booklet

Contents

Zanussi ZEC40 Instruction Booklet Manual pdf 7 page image

7LocationThis appliance is designed to be built-in to a spacehaving the dimensions given in Fig. 2.Fig. 2The height of the appliance can be altered ifrequired by means of adjustable feet situated at itsbase (Fig. 3).Fig. 3100-170596820-870547550600820870Door reversibilityRemove the two screws which fix the upper hinge tothe door.Carefully lean the appliance on its back and removethe plastic insert (Fig. 4).Fig. 4Remove the two screws which fix the lower hinge tothe door.Remove the four screws which fix the lower hingeto the base of the appliance and remove the hingeitself; be very careful to recover all the screws.Remove the four screws that fix the upper hinge tothe appliance and remove the hinge itself.Take the hinge removed from the upper part of theappliance on the opposite side (see Fig. 5), and,using the screws removed from the lower part, fix itto the base of the appliance itself.Remove and refit the other hinge on the upper partof the appliance on the opposite side.Fix the two front screws into the upper and lowerhinges (Fig. 5).Fig. 5Finally, check the alignment of the door and makesure it closes properly.After having reversed the opening direction of thedoor, discard the original plastic insert removed andfit the insert supplied with the appliance on theopposite side.D447