Zanussi ZDT312 User Manual

Also see for ZDT 312: Specifications User manual

Zanussi ZDT312 User Manual Manual pdf 6 page image

2. Simultaneously press and hold functionbuttons B and C until the lights of functionbuttons A, B and C start flashing.3. Press function button C, the lights of func-tion buttons A and B turn off while the lightof function button C goes on flashing. Atthe same time the end of programme in-dicator light illuminates indicating that theaudible signals are active.4. To deactivate the audible signals pressagain function button C, the end of pro-gramme indicator light turns off, indicatingthat the audible signals have been deacti-vated.5. To memorise the operation switch off thedishwasher by pressing the On/Off button.To activate again the audible signals simplyfollow the above operations until the end ofprogramme indicator light illuminates.Select and start a washing programmeIMPORTANT!Select the washing programme and delay startwith the door slightly opened. The start of theprogramme or the countdown of the delay startwill occur only after the closure of the door. Untilthen it is possible to modify the set made.1. Check that the baskets have been loadedcorrectly and that the spray arms are freeto rotate2. Check that the water tap is opened3. Press the On/Off button. The dishwashermust be in setting mode.4. Press the button corresponding to the re-quired programme (see "Washing pro-grammes" chart).When a programme has been selected thecorresponding light will illuminate.5. Close the dishwasher door, the pro-gramme starts automatically.Setting and starting theprogramme with "delay start"1. After having selected the washing pro-gramme, press the delay start button untilthe light corresponding to the chosen hoursflashes (3h, 6h, 9h).2. Close the dishwasher door, the countdownstarts automatically.3. The countdown will decrease with steps of3 hours.4. The opening of the door will interrupt thecountdown. Close the door; the countdownwill continue from the point at which it wasinterrupted.5. Once the delay start has elapsed the pro-gramme will start automatically.Cancelling the delay startTo cancel a delay start in progress you have toreset the dishwasher.Press simultaneously and keep pressed func-tion buttons B and C until all programme buttonlight are illuminated.6