OneStart

Menu
Zanussi ZDF26001WA User Manual Manual pdf 15 page image

Zanussi ZDF26001WA User Manual

Also see for ZDF26001WA: User manual

Page 1 previewPage 2 previewPage 3 previewPage 4 previewPage 5 previewPage 6 previewPage 7 previewPage 8 previewPage 9 previewPage 10 previewPage 11 previewPage 12 previewPage 13 previewPage 14 previewPage 15 previewPage 16 previewPage 17 previewPage 18 previewPage 19 previewPage 20 preview
Zanussi ZDF26001WA User Manual Manual pdf 15 page image
• To maintain the performance of your applianceat its best, we recommend to use monthly aspecific cleaning product for dishwashers.Follow carefully the instructions on thepackaging of the product.TROUBLESHOOTINGIf the appliance does not start or it stops duringoperation. Before you contact an AuthorisedService Centre, check if you can solve the problemby yourself with the help of the information in thetable.WARNING! Repairs not properly donemay result in serious risk to the safetyof the user. Any repairs must beperformed by qualified personnel.With some problems, the display shows analarm code.The majority of problems that can occur canbe solved without the need to contact anAuthorised Service Centre.Problem and alarm code Possible cause and solutionYou cannot activate the appli-ance.• Make sure that the mains plug is connected to the mains sock-et.• Make sure that there is no damaged fuse in the fuse box.The program does not start. • Make sure that the appliance door is closed.• If the delay start is set, cancel the setting or wait for the end ofthe countdown.• The appliance has started the procedure to recharge the resininside the water softener. The duration of the procedure is ap-proximately 5 minutes.The appliance does not fill withwater.The display shows .• Make sure that the water tap is open.• Make sure that the pressure of the water supply is not too low.For this information, contact your local water authority.• Make sure that the water tap is not clogged.• Make sure that the filter in the inlet hose is not clogged.• Make sure that the inlet hose has no kinks or bends.The appliance does not drainthe water.The display shows .• Make sure that the sink spigot is not clogged.• Make sure that the filter in the outlet hose is not clogged.• Make sure that the interior filter system is not clogged.• Make sure that the drain hose has no kinks or bends.The anti-flood device is on.The display shows .• Close the water tap and contact an Authorised Service Centre.The appliance stops and startsmore times during operation.• It is normal. It provides optimal cleaning results and energy sav-ings.The program lasts too long. • If the delayed start option is set, cancel the delay setting or waitfor the end of the countdown.The remaining time in the dis-play increases and skips nearlyto the end of program time.• This is not a defect. The appliance is working correctly.15
/ 20
This manual is suitable for:
ZDF26001WAZDF26001XA
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved