Zanussi ZDF 312 User Manual

Zanussi ZDF 312 User Manual Manual pdf 21 page image

more detailed information about recycling ofthis product, please contact your local council,your household waste disposal service or theshop where you purchased the product.Something not workingThe dishwasher will not start or stops duringoperation. Certain problems are due to the lackof simple maintenance or oversights, which canbe solved with the help of the indications de-scribed in the chart, without calling out anengineer.Switch off the dishwasher, open the door andcarry out the following suggested corrective ac-tions.Fault code and malfunction Possible cause and solutionThe dishwasher does not fill with water.• continuous flashing of the light of the runningprogramme• 1 flash of the "End of programme" light• The water tap is blocked or furred with limescale.Clean the water tap.• The water tap is turned off.Turn the water tap on.• The filter (where present) in the threaded hose fittingat the water inlet valve is blocked.Clean the filter in the threaded hose fitting.• The water inlet hose has not been correctly laid orit is bent or squashed.Check the water inlet hose connection.The dishwasher will not drain.• continuous flashing of the light of the runningprogramme• 2 flashes of the "End of programme" light• The sink spigot is blocked.Clean out the sink spigot.• The water drain hose has not been correctly laid orit is bent or squashed.Check the water drain hose connection.• continuous flashing of the light of the runningprogramme• 3 flashes of the end of programme indicator light• Anti-flood device is activatedClose the water tap and contact your local ServiceForce Centre.• The programme does not start. • The dishwasher door has not been properly closed.Close the door.• The main plug is not plugged in.Insert the mains plug.• The fuse has blown in the household fuse box.Replace the fuse.21