ZIEHL-ABEGG iControl FSDM2.6 Operating Instructions Manual

ZIEHL-ABEGG iControl FSDM2.6 Operating Instructions Manual Manual pdf 7 page image

3 Product overview3.1 Operational areaIcontrolis the type-line of ZIEHL-ABEGG frequency inverters for controlling one motor with forfrequency innverter suitable isolation system and bearings.Only suitable for drives with low set-off torque (e.g.: fans or pumps).We expressly point out that controlling ZIEHL-ABEGG fans in parallel operation is not possible in thisseries without endangering the motors.For trouble free operation of several motors we recommend using our Fcontrol series frequencyconverters with integrated sinusoidal filter.3.2 Functional descriptionThe frequency inverters generate their 3~ output with variable voltage and frequency from the three-phase mains on the input.The devices are constructed in accordance with the general requirement in EN 61800-2 for adjustablespeed electrical power systems and is intended for one-quadrantdrives.The output frequency is set by an external signal (0 - 10 V, 0 - 20 mA, PWM).3.3 MaintenanceThe device must be checked for soiling and, if necessary, cleaned in periodic intervals.3.4 Transport• The device is packed ex factory to suit the transport method previously agreed.• Always use the original packaging materials when transporting the device.• Avoid shocks and impacts to the device during the transport.• During manual handling the human lifting and carrying restrictions must be observed and adheredto.3.5 Storage• The device must be stored in its original packaging in a dry and weather-proof room.• Avoid exposure to extreme heat and cold.• Avoid prolonged storage; we recommend a maximum of one year (consult the manufacturer beforestarting if stored for longer).3.6 Disposal / recyclingDisposal must be carried out professionally and in an environmentally friendly way in accordance withthe respective national legal stipulations." Separate the materials by type and in an environmentally friendly way." If necessary, commission a specialist company with the waste disposal.Operating Instructions Icontrol Basic – model series FSDM2.6...62 Product overviewL-BAL-E160-GB 1701 Index 004 Part.-No.7/28