Menu
ZENDit WIR302B Instruction Manual
                | |
6 www.Zendit.coWireless Key PadsOur dual channel key pads can be used to create a fi xedaccess pad ideal for opening doors and gates eliminatingthe risk of losing or forgetting keys.Relays are activated by entering a numeric passwordrather than the press of a single button for a securewireless solution.This section explains the simple steps required forinstallation, pairing key pads to receivers, operation,password management and battery replacement.SpecificationFrequency Range Battery Dimensions433.92MHz Up to 100m 3V CR2450 93 x 73 x 43mmInstallationAs an anti-tamper measure key pads can only be installedand removed using one of the keys supplied:Step 1Insert the key into the lock on the underside of the keypad. Turn the key clockwise until it clicks and then lift thefront of the key pad off the mounting plate.Step 2There are fi ve mounting indented knock-out holes forsecuring the key pad. Either use a hammer and punchor drill out the holes required. You can choose to use 3screws in holes 2, 4 & 5 or 4 screws in holes 1, 3, 4 & 5.Step 3Mark the screw positions on the mounting surface, drillthe holes and plug with appropriate fi xings.Step 4Screw through the holes in the key pad’s base and into the plugs.1Key143522Key Pad Part Codes:Black - WIR305B White - WIR305W |
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved