ZANKER ZKS5642 User Manual

Also see for ZKS5642: Instruction book

Contents

ZANKER ZKS5642 User Manual Manual pdf 19 page image

The wash results are not satisfactoryThe dishes are not clean • The wrong washing programme has been selected.• The dishes are arranged in such a way as to stopwater reaching all parts of the surface. The basketsmust not be overloaded.• The spray arms do not rotate freely due to incorrectarrangement of the load.• The filters in the base of the washing compartmentare dirty or incorrectly positioned.• Too little or no detergent has been used.• Where there are limescales deposits on the dishes;the salt container is empty or the incorrect level ofthe water softener has been set.• The drain hose connection is not correct.• The salt container cap is not properly closed.The dishes are wet and dull • Rinse aid was not used.• The rinse aid dispenser is empty.There are streaks, milky spots or a bluish coating onglasses and dishes• Decrease rinse aid dosing.Water drops have dries onto glasses and dishes • Increase rinse aid dosing.• The detergent may be the cause. Contact the de-tergent manufacturer’s consumer care line.If after all these checks, the problem persists,contact your local Service Force Centre.Technical dataDimensions Width x Height x Depthcm59,6 x 81,8-87,8 x 57,5Electrical connectionVoltage - Overall power - FuseInformation on the electrical connection is given on the rating plate on theinner edge of the dishwasher’s door.Water supply pressure Minimum - Maximum(MPa)0,05 - 0,8Capacity place settings 12Max. weight kg 38,519