ZANKER ZKG 8408 Instruction Booklet

Contents

ZANKER ZKG 8408 Instruction Booklet Manual pdf 5 page image

41INSTALLATIONIf this appliance featuring magnetic door seals is toreplace an older appliance having a spring lock(latch) on the door or lid, be sure to make thatspring lock unusable before you discard the oldappliance.This will prevent it from becoming a death-trapfor a child.PositioningThe appliance should be installed well away fromsources of heat such as radiators, boilers, directsunlight etc.Best performance is obtained with ambienttemperature between +18°C and +43°C (class T);+18°C and +38°C (class ST); +16°C and +32°C (classN); +10°C and +32°C (class SN).The class of your appliance is shown on its ratingplate.For building into kitchen units follow the special“Building-in” instructions given.ImportantThe appliance must be earthed.The power supply cable plug is provided with acontact for this purpose.If the domestic power supply socket is not earthed,connect the appliance to a separate earth incompliance with current regulations, consulting aspecialist technician.The Manufacturer declines all responsibility if theabove safety precautions are not observed.This appliance complies with EEC directivenumber 87/308 of 2/6/87 relative to radiointerference suppression.This appliance complies with the followingE.E.C. Directives:- 73/23 EEC of 19.2.73 (Low Voltage Directive) andsubsequent modifications;- 89/336 EEC of 3.5.89 (ElectromagneticCompatibility Directive) and subsequentmodifications.Cleaning the interiorBefore using the appliance for the first time, wash theinterior and all internal accessories with lukewarmwater and some neutral soap so as to remove thetypical smell of a brand-new product, then drythoroughly.Do not use detergents or abrasive powders, as thesewill damage the finish.GB