ZANKER SF2000 User Manual

Contents

ZANKER SF2000 User Manual Manual pdf 14 page image

784. Select the desired optionDepress the button “SPOELEN+ / RINCAGES+”, ifrequired.5. Select the “spin suppression” or “spinspeed reduction”Depress the button (s), if required.6. Select the temperatureTurn the dial to the required setting.-./.0.1.1.2.30 1..4...&(+,()&*Operating sequenceBefore the first wash we recommend that you pour 2litres of water into the main wash compartmentof the detergent drawer in order to activate the ECOvalve. Then run a cotton cycle at 60°C, with themachine empty, in order to remove anymanufacturing residue from the drum and tub.Pour half a measure of detergent into the main washcompartment and start up the machine.1. Place the laundry in the drumOpen the door.Place the laundry in the drum, one item at a time,shaking them out as much as possible.Close the door.2. Measure out the detergentPull out the dispenser drawer until it stops. Measureout the amount of detergent recommended by themanufacturer in a graduated cup and pour it into themain wash compartment .If you wish to carry out the prewash, pour detergentinto the appropriate compartment marked .3. Measure out the additiveIf required, pour fabric softener into thecompartment marked , without exceeding the«MAX» mark.