Yeastar Technology MyPBX U300 Installation Manual

Also see for MyPBX U300: How to use Installation guide Extension user guide Administrator's guide

Contents

Yeastar Technology MyPBX U300 Installation Manual Manual pdf 12 page image

MyPBX U300 Installation Guidehttp://www.yeastar.com12/154.2 Logging in the Web Configuration PanelFirstly, please check if the IP address that assigned to the network port (LAN or WAN) is in the same segmentwith the PC and which can be connected when commit ‘Ping +MyPBX IP address’ command. Start thebrowser on PC. In the address bar, enter the IP address, click ‘enter’ button and then you can seeMyPBXU300 Web Configuration Panel login page (See Figure 4-1).Figure 4-1 MyPBX Web Configuration Panel Login PageEnter the Admin User Name and Password to log in.Figure 4-2 MyPBX Admin Configuration InterfaceVia the configuration interface, the admin can make all the system configurations, including network settings(LAN, WAN, Firewall, VPN, DDNS, VLAN, etc.); system parameters configuration (system prompts, time zone,password, etc.); internal settings(Web access port, user extension range, business hours, conference room,paging and intercom, music on Hold, etc.); inbound routes; outbound routes; user account management (addor delete an extension account, IP restriction, features setup, etc.); extended function management (callqueue, conference room, IVR, etc.); call logs (search, download); firmware update and reset, etc.Please note that after saving the changes, remember to click the “Apply changes” button to make thechanges take effect.

/ 15

Related manuals for Yeastar Technology MyPBX U300