Yamaha YWA-10 Configuration Manual

Also see for YWA-10: Owner's manual Owner's manual Quick setup guide User manual

1. Connecting the YWA-10 to a PCYWA-10 Wireless Network Adapter - WPA Manual Setupa. Connect the supplied USB power cable and the Network cable tothe YWA-10 and the PCNote: If the PC already has network cable plugged in fromthe network, you will have to remove it temporarily for this setup.Or if the PC is connected to a wireless network, you will needto disable it temprarily for this setup.b. Wait about 2 minutes for the YWA-10 to become ready.4. Checking Network ConnectivityOnce the YWA-10 is connected to the AV Receiver, you can test theinternet connectivity by going to the Net Radio input and selectinga station.a. Press the Net button on the receiver remote repeatedly until Net Radiois displayed.b. If the On-Screen Display shows Bookmarks, Locations, Genres, etc. youare successfully connected to the internet.For this setup you will need to have the WPA security settings from your router. Please consult the wirelessrouter owner’s manual for information on how to retreive those settings. If you do not have this information,please consult with the individual that installed your network.2. Setting Up the YWA-10a. Open up your web browser on the PC.b. Enter in `ywa.setup` in the address field of the web browser andpress `Enter`.Note: If the screen does not appear even after you have enteredin `ywa.setup`, enter in 192.168.1.249 and press enter. If thelogin screen still does not appear, refer to the reset procedurelisted in the YWA-10 FAQ section.c. On the login screen, enter in `admin` for the User ID and `password`for the password. Then click the `OK` Button and the Status pagewill display in the brower window.e. The `Wireless Site Survey` window will come up, choose the nameof your wireless network and select `Next`.f. The `Profile Settings` window will come up, enter in the securityinformation.• Profile Name (example: Yamaha1)• Securty Mode/Encryption Type: WPA or WPA2, (PSK/Personal)• WPA Authentication Type• Pre-Shared KeyClick on `Next` (the `Profile List` will blink for a second) and the`LAN Setup` window will come up on the screen.g. Do not enter any information in the LAN Setup window. Just click`Apply` then wait for 60 seconds to close the browser window.d. Click on the `Setup Wizard` and then click on `Next`.h. Open a new browser and try accessing a website like `usa.yamaha.com`If the website loads, the YWA-10 setup is complete.i. Remove the network and USB cable from the PC.3. Connecting the YWA-10 to the AV ReceiverNow that the YWA-10 is configured to work with your wirelessnetwork, it is not ready to be used with the AV Receiver.a. Make sure the AV receiver is powered off.b. Plug in the Network and USB cables from the back of YWA-10 tothe back of the AV receiver.c. Turn on the power for the AV receiver.d. Wait for 2 to 3 minutes for the YWA-10 and the wireless networkto synchronize.e. The YWA-10 is now setup to allow network access on the AV receiver.AV ReceiverRear Panel

/ 1

Related manuals for Yamaha YWA-10