Menu
Yamaha YM31056 Installation Manual
      |
WARNING:To reduce the risk of injury, user must read and under-stand the operator’s manual for their pressure washerbefore using this accessory. To reduce the risk of injuryor property damage, spray the pressure stream in a safedirection to ensure proper connection of all accessoriesbefore starting any cleaning project. Fits most pressurewashers. Ensure compatibility and proper fit before us-ing this accessory. Wear eye protection with side shieldsmarked to comply with ANSI Z87.1. Risk of fluid injec-tions; do not point at people, pets, electrical devicesor the unit itself. Turn off the pressure washer beforechanging or adjusting accessories. For cold water useonly. For outdoor use only – store indoors. Save theseinstructions. Refer to them frequently and use them toinstruct other users. If you loan someone this tool, loanthem these instructions also.PRODUCT SPECIFICATIONSConnections .............................1/4 in. Quick Connect PlugDeck Width ................................................................. 15 in.Maximum Pressure................................................ 3300 psiMaximum Water Flow................................................3 gpmMaximum Water Temperature ....................................140°FINSTALLING THE SURFACE CLEANER ONTHE SPRAY WANDSee Figure 1.n Insert the surface cleaner inlet plug into the spray wandquick connect coupler and secure.WARNING:To reduce the risk of injection or injury, only use the sur-face cleaner on flat, horizontal surfaces. Never lift thesurface cleaner from the cleaning surface while operatingthe pressure washer.USING THE SURFACE CLEANERSee Figure 2.n Start the pressure washer as described in your pressurewasher manual.n Walk slowly behind the cleaning deck, cleaning as yougo.NOTE: If striping or swirling occurs, slow your pace. Ifstriping or swirling continues, the surface cleaner nozzle(s)may be clogged. See Nozzle Maintenance for how toclean the nozzles.Fig. 1INLETPLUGFig. 2QUICK CONNECTCOUPLERWARNING:Striking any raised obstacle while using the surfacecleaner will damage the unit. If contact does occur andcauses vibration when operating the pressure washer,stop and discontinue use. Continuing to operate the unitcould result in serious injury or damage to the unit.15 in. Surface Cleaner AttachmentACC-31056-00-18 (ITEM YM31056) |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved