Menu
Yamaha S20 Service Information
                                  |
For Service EngineerService InformationSI1604009E-002= S20, S10, M20, M10 and D10 installation procedures5/343. Carry in machines & equipment and level the machine3.1 Confirmations before carrying-inA transport company will bring the machine to the customer’s site by truck, etc.The followings are the required confirmations before unloading the machines or equipment from a truck. Make sure there is no damage to the machine.If any damage, dent or deformation caused during transportation found on the machine, have thetransport company check the situation out, and take some pictures of the damaged part on the spotas evidence (taking pictures using a cell phone is fine). Also let the customer know immediately totake proper measures. Make sure that all the requirements for installing the machine have been delivered to theinstallation site.If the requirements for installing the machine have not been delivered to the installation site, inform thetransport company immediately and have them to ship the items by other truck. Check the external temperature.If the external temperature is low, condensation may occur. Explain this to the customer and ask themto prepare the place to temporarily locate the machine (the difference between the externaltemperature and the temperature in the installation site must be 10 degrees C or less).Rent a stove, etc., and gradually warm up the machine. Carry in the machine after confirming that thebase of the machine temperature rises 5 degrees C.Caution:Condensation may occur on the machine when the difference between the external temperature and the base ofthe machine temperature is 10 degrees C or more. Make arrangement with the customer regarding the installation of the machine beforehand.Make final checks if the installation of the machine, the electric work and the work for air supply aregoing to be performed as scheduled, and the safety precautions (as the regulations vary dependingon the customer).3.2 Unload the machines and equipmentNormally a transport company unloads the machine from a truck using a forklift, etc.Caution:When the machine is on a truck, confirm that the supporting legs (locating in the bottom center of S20 and M20)are raised.Carry in the machine that was unloaded from a truck to the installation site by operating a transportequipment such as a hand lifter, etc. Make sure to follow the precautions below. Precaution when operating a forkliftWhen the machine is packed, the notice is labelled as shown in the figure below to avoid the fork of theforklift and the cover of the machine from interfering with each other.Do not insert the fork into the labelled part as the cover, etc., may be damaged.See “5.1 Unload the machine by suspending“ for unloading the machine operating a unic.S10, M10 S20, M20 |
Related manuals for Yamaha D10
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved