Yamaha DVD-S2500 Manual 

Also see for DVD-S2500: Product catalog Owner's manual Owner's manual Service manual Quick start guide

Partner: YamahaModel: DVD-S2500Device Type: DVD PlayerGENERAL INFORMATIONSIMPLWINDOWS NAME: Yamaha DVD-S2500CATEGORY: Transport DecksVERSION: 1.0SUMMARY: This module will control the Yamaha DVD-S2500.GENERAL NOTES: This module will control most of the DVD-S2500’s “runtime” functions. Whenany command is sent to the receiver, this module will acknowledge that thecommand was processed and the corresponding feedback will be reflected atthe outputs of this module.NOTE: This module depends on feedback from the device. You cannotcomment out the FROM_DEVICE$ serial input. This serial signal must be usedfor proper module operation. Some functions of this module will not operate incertain modes. Please review manufacturer’s manual for more details.CRESTRON HARDWARE REQUIRED: CNXCOM-2, ST-COM, C2-COMSETUP OF CRESTRON HARDWARE: RS232Baud: 9600Parity: NData Bits: 8Stop Bits: 1H/W Hand Shaking: RTS/CTSVENDOR FIRMWARE: N/AVENDOR SETUP: NONECABLE DIAGRAM: CNSP-532

/ 3

Related manuals for Yamaha DVD-S2500