Connecting an analog audio componentCONNECTIONS••Be sure to disconnect the power cords of bothcomponents from the AC outlet before connecting.The same channels of this unit and the othercomponent should be connected properly; right toright, and left to left.1 Connect the ANALOG INPUT jacks (balanced type orunbalanced type) of this unit to the analog output jacksof the amplifier or stereo mixer, etc.2 Connect the ANALOG OUTPUT jacks (balanced type orunbalanced type) of this unit to the analog input jacksof the amplifier or stereo mixer, etc.3 Set the ANALOG INPUT selector. When using thebalanced type terminals, set this selector to the XLRposition. When using the unbalanced type jacks, setthis selector to the PIN position.NOTE:Make sure all connections are securely made. Looseconnections may cause intermittent sound or noise.1 0