Yamaha DME Series Setup Manual

DME Setup Manual• For more details regarding a specific DME unit, please refer to the manual supplied with the unit in question, and for more details regarding the DME Designer application, please refer to the DME Designer manual (pdf).• Please note that, within this document, the term “DME” refers to the DME64N and DME24N, while the term “DME Satellite” refers to the DME8i-C, DME8o-C, DME4io-C, DME8i-ES, DME8o-ES, and DME4io-ESThis manual describes the process of setting up a DME system, from making the initial DME unit settings (DME64N /DME24N / DME8i-C / DME8o-C / DME4io-C / DME8i-ES /DME8o-ES / DME4io-ES) to synchronizing with the DMEDesigner application installed on a computer.page02page04 page081-1. Install DME Designer and DME-N Network Driver1-2. Install the USB-MIDI Driverpage13Setting up DME64N/24NNetworks viaPanel OperationsThis section explains how to setup networks directlyfrom a DME64N/24N.page13Related web site on DMEUnits and peripheralsThis section serves as a guide to onlineinformation on Speaker Processor Componentslibrary data, optional cards, and touch-panelcontrollers (AMX/Creston).page13Connecting toExternal DevicesThis section covers connection toremote controllers via Ethernetor GPI.page16Troubleshooting & Tips ChartThis chart serves as a quick guide to the steps that should be taken toensure correct operation of DME units.page14Appendix:Detailed DME-N Network Driver settingsConnecting a single DME unitdirectly to a computer via USB cableSetting up DME cards(only when expansion cards will be used)Configuring components and Writing configurationsGoing Online and Checking sound outputDME setupChanging the computer's IP address settingsSetting the DME-N Network DriverConnecting with DME DesignerConnecting multiple DME unitsto a computer via Ethernet cablesConnecting Computer and DME unitThis sections covers procedures for either connecting a single DME unit to a computer or connecting multiple DME units toa computer within the same subnet.4. In-depth Information on DME Units1. Installing the Software2. Basic Setup 3. Advanced Setup