Yamaha DM2000 Owner's Manual

Also see for DM 2000 Version 2: Owner's manual Owner's manual Owner's manual Owner's manual Installation guide

5 Chapter 2—Console WindowStudio Manager for DM2000 V1.1—Owner’s ManualInput ChannelsA SOURCE parameterThis parameter is used to select an Input source. To select anInput source, click the parameter and choose from the list thatappears.B Routing buttonsThese buttons are used to route the Input Channel to the BusOuts.C STEREO buttonThis button is used to route the Input Channel’s signal to theStereo Out.D DIRECT buttonThis button turns on and off the Input Channel’s routing to itsDirect Out.E Direct Out parameterThis parameter is used to select the Direct Out destination. Toselect a destination, click the parameter and choose from the listthat appears.F PHASE buttonThis button is used to reverse the signal phase of the channel.G INSERT buttonThis button is used to turn on and off the Input Channel’sInsert.H GATE buttonThis button is used to turn on and off the Input Channel’s Gate.I Gate open/close indicatorsThese indicators display whether the Gate is open (green) orclosed (red).J Gate thresholdThis displays the Gate Threshold, which can be set by dragging.K COMP buttonThis button is used to turn on and off the Input Channel’s Com-pressor.L Compressor curveThis display shows the Compressor’s curve.M EQ buttonThis button is used to turn on and off the Input Channel’s EQ.N EQ curveThis display shows the Equalizer’s curve, which can be set bydragging.O DELAY buttonThis button is used to turn on and off the Input Channel’s Delayfunction.BCD679KJLMNOPQRWXYZ85ab1TV US