Online ServicesDKC-850 INTERNET CONNECTION GUIDEConnection ExampleWireless connection*He re, "m ode m " refers to an ADSL m odem , optica l network unit (O NU),or cable m odem .*ModemAccess pointWireless bridge deviceEthernet cableInstructionsPURCHASE ACOMPATIBLE LANBRIDGE DEVICEAny LAN bridge compatible with your network should allow you toconnect your instrument wirelessly. However, the following deviceshave been fully tested and are recommended for use with Yamahainstruments:LINKSYS WET610NBUFFALO WLI-TX4-AG300NYou may need to refer to the manufacturer's instructions toconfigure your adapter. A full list of compatible adapters is availableat the Yamaha Download Site.CONFIGURE THEBRIDGE ADAPTERSet up your adapter to connect to your wireless network, followingthe directions provided for your adapter. If you have any problemsconnecting the bridge device to your network, please contact thedevice manufacturer for further support.ATTACHETHERNET CABLETo your DisklavierAttach one end of an Ethernet cable to the rear port of the bridgeadapter and the other end to the Ethernet port on your Disklavier.PRESS Press the [Internet] button on your remote. Congratulations, youare now connnected. You should see the Internet Direct Connectionhome page.Still can't connect? Follow these instructions…6/4/2011 Yamaha: Connect to Radio Service For ……yamaha.com/connect/wirelessType?t… 1/2