Yamaha AN1x Owner's Manual

Also see for AN1x: Data list Service manual Owner's manual

Contents

Copy Procedure1. Press Track No [UP/DOWN] to select the track towhich you want to copy Free EG data to(destination).2. Press Copy [UP/DOWN] to select the track fromwhich you want to copy Free EG data (source).The Copy operation is completed.When the “Cpy fm” (Copy from) page is displayed in theLCD, you can press Copy [UP/DOWN] to select a track fromeither the current voice or from another voice. As you select atrack, you can play the keyboard to hear how the new FreeEG data affects the voice.When the new track number is selected (step 2), the copyoperation is completed.There is no specific copy confirmation function, but you can retrieve theoriginal track Free EG data using the Undo function.Remember that Free EG data consists of knob movement data and not actualparameter values. This means that the parameter controlled can be anythingyou set for the Track Number using the Param setting.l UndoThe Undo function lets you “undo” as well as “redo”the most previous Free EG copy or record operation.After a copy or record operation, simply press Undo(/Redo) [UP/DOWN] to toggle back and forthbetween the new data and the original data.Free EG Recording Procedure1. Press the Rec [UP/DOWN] switch and enterRecord Standby (Track or All) mode.In Record Standby mode, Length and Track Number parameters are available,but others cannot be accessed. (Also, MIDI control will be ineffective.)In Record Standby mode or during recording, you can stop the record operationby turning the [EDIT ROTARY] switch, and return to the REC OFF status.If you want to record in the selected track, choose REC STBY Trk. If you wantto record in all four tracks, choose REC STBY All.2. Change the Free EG Length (see page 82), orselect a Track Number for the selectedParameter (see page 83).When the Length parameter is set to "bar", the length isdetermined by the Tempo setting, and a click will sound (inquarter-note beats) to use as a timing guide.3. When you press a key on the keyboard,recording will begin, so you can start movingthe knob (or knobs) as desired.Recording time is visually displayed by the horizontal data graph in the LCD.When the KNOB PARAMETER GROUP [ASSIGN] switch is selected, knobmovements will not be recorded in the track.In step 1, above, if REC STBY Trk is selected, the knob mostrecently moved is already designated as available forrecording. If REC STBY All is selected, the four most recentlymoved knobs are already designated as available forrecording.When you start recording the Free EG, the currently selected Scene will beautomatically assigned to the Scene Switch (for the selected track), and theparameter of the first knob you move will be assigned to track Parameter (i.e.,that parameter will be recorded in the track). This is convenient for initiating aFree EG recording immediately, without making all settings beforehand.When Scene Control is activated, setting the Free EG to Record Standby modeautomatically selects Scene 1.4. Recording automatically stops when the end ofthe set Length is reached.84