Yamaha AI8 Owner's Manual

Also see for AI8: Owner's manual Owner's manual Owner's manual

ANALOG INCH2BB SIGNALMIC/LINE INPUT CARDMODEL LMY2-MLB SIGNALCH2A CH1B CH1AWhen the indicator is lit in orange, channel B is selected.When the indicator is turned off, channel A is selected.The green LED lights upat 34 dB before clipping.ANALOG INCH4SIGNAL SIGNALAD CARDMODEL LMY4-ADSIGNAL SIGNALCH3 CH2 CH1The green LED lights up at 34 dB before clipping.Input Actual Load For Use With Input Level ConnectorTerminals Impedance Nominal Nominal Max. Before ClipCH 1-4 10 kΩ 600 Ω Lines +10 dB (2.45 V)* +24 dB (12.3 V)* XLR-3-31 type (Balanced)*** 0 dB is referenced to 0.775 Vrms.** 1=GND, 2=HOT, 3=COLDAD Conversion: 24 bit linear +4 bit floating, 128 times oversampling.I/O cardsforANALOG OUTPUT BOXANALOG INPUT BOXMIC/LINE INPUT CARD LMY2-MLAD CARD LMY4-ADDA CARD LMY4-DAT hank you for choosing the Yamaha input card for the analog input box AI8, and the Yamaha output card for the analogoutput box AO8.Be sure to ask an authorized Yamaha service engineer to install the cards. Do not install the cards yourself.The connecting screw also functions as the ground. Secure the screw tightly. LMY2-MLThis is a two-channel analog input card. Set the input level in the rangeof –68 dB to +10 dB.You can install up to eight cards in the analog input box AI8.Input GAIN*** Actual Load For Use With Input Level ConnectorTerminals Impedance Nominal Nominal Max. Before ClipCH1A, CH1B –68 dB 3 kΩ 50-600 Ω Mics –68 dB (309 μV)* –54 dB (1.55 mV)* XLR-3-31 typeCH2A, CH2B +10 dB & 600 Ω Lines +10 dB (2.45 V)* +24 dB (12.3 V)* (Balanced)*** 0 dB is referenced to 0.775 Vrms.** 1=GND, 2=HOT, 3=COLD*** The GAIN control level displayed on the CS1D.+48VDC (phantom power) is individually supplied to each input connectors.AD Conversion: 24 bit linear +4 bit floating, 128 times oversampling. LMY4-ADThis is a four-channel analog input card.You can install up to eight cards in the analog input box AI8.

/ 2

Related manuals for Yamaha AI8