YDP-160YDP-140For information on assembling the keyboard stand, refer to the instructions at the end of this manual.IMPORTANT — Check your power supply — (YDP-160)Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottompanel. In some areas a voltage selector may be provided on the bottom panel of the main keyboard unit near thepower cord. Make sure that the voltage selector is set for the voltage in your area. The voltage selector is set at240V when the unit is initially shipped.To change the setting use a "minus" screwdriver to rotate the selector dial so that the correct voltage appearsnext to the pointer on the panel.Owner's ManualEN
