Menu
Xorcom CXE2000 Getting Starded Manual
       | |
Contents | 
8 Katom St., Misgav Industrial Park, 2017400, IsraelTel: +972-4-9951999; Fax: +972-4-9990287PM0617.08 - CXE2000/CXE3000 CompletePBX Getting Started Guide (electronic version) Page 1 of 7CXE2000/CXE3000 CompletePBX: Getting Started GuidePackage Contents CXE2000/CXE3000 (2U 19'' widthunit) Power cord Support hardware for 19'' cabinet CompletePBX 5 software preinstalledon the hardwarePrerequisitesYou need a computer equipped with an Internet browser. Firefox is recommended.Step 1: Earthing the Unit1) For safety and performance reasons, it is essential to ground the unit.Note: Not properly grounding this device will void your warranty!2) Use a star washer to securely connect a grounding tab to the grounding screw on the rearpanel.3) Using 12-16 gauge wire, connect the grounding tab to a reliable ground.4) All Xorcom hardware should be connected to a common grounding point.Figure 1: Detail of CXE2000 Rear PanelFigure 2: Detail of CXE3000 Rear PanelStep 2: Powering Up the Unit1. Connect a keyboard and a VGA/SVGA screen.2. Connect the unit to the LAN.3. Connect the power cord to the power input socket on the rear panel.4. Turn on the power using the power button on the front panel.5. The startup process takes about 2 minutes. The startup time depends on the number oftelephony ports installed in your CXE2000/CXE3000 unit.GroundingPower SupplyPower Supplynic0 nic1Groundingnic0nic1IPMI |
Related manuals for Xorcom CXE2000
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved