VCU118 Board User Guide 8UG1224 (v1.0) December 15, 2016 www.xilinx.comChapter 1: Introduction• Two Pmod 2x6 connectors (one male pin header, one right-angle receptacle)• VITA 57.4 FMC+ HSPC connector J22• VITA 57.1 FMC HPC1 connector J2• Power management with PMBus voltage monitoring through Maxim power controllersand GUI• 10-bit 0.2 MSPS SYSMON analog-to-digital front end• Configuration options:° BPI linear flash memory° Digilent USB configuration module° Platform cable USB II interface 2x7 2 mm connectorBoard SpecificationsDimensionsHeight: 6.927 inch (17.59 cm)Thickness (±5%): 0.061 inch (0.1549 cm)Length: 9.5 inch (24.13 cm)Note: A 3D model of this board is not available.IMPORTANT: The VCU118 board height exceeds the standard 4.376 inch (11.15 cm) height of a PCIExpress ® card.EnvironmentalTemperatureOperating: 0°C to +45°CStorage: -25°C to +60°CHumidity10% to 90% non-condensingSend Feedback
