Xerox WorkCentre 77 Series Reference Manual

Also see for WorkCentre 77 Series: Configuration guide Manual

Xerox WorkCentre 77 Series Reference Manual Manual pdf 16 page image

dc10cc0465Customer Support Page 16FOLDThis command indicates an optional fold type generated by the professional finisher. The short edge feed command is alsorequired to use the booklet fold command.PJL COMMENT Cmd DSC Comment Cmd PS Set Page@PJL COMMENTOID_ATT_FOLD string;%%OID_ATT_FOLDOID_VAL_FOLD_string;/Fold int1/FoldDetails /Type 5 /FoldMethod int2Where string is:TRIFOLDCTRIFOLDZZFOLDWhere int1 is:0 = No Fold3 = Fold at end of setWhere int2 is:1 = TriFold C2 = TriFold Z3 = Z-Fold HalfSheetNote: TriFold C requires a LeadingEdge 0 and/or OID_VAL_FEED_EDGE_SHORT_LEADING command to insureSEF feeding. TriFold Z requires a LeadingEdge 0 and/or OID_VAL_FEED_EDGE_SHORT_LEADING command.BOOKLET FOLDThis command indicates an optional fold type generated by the professional finisher. The short edge feed command is alsorequired to use the booklet fold command.PJL COMMENT Cmd DSC Comment Cmd PS Set Page@ PJL COMMENTOID_ATT_BOOKLETOID_VAL_BOOKLET_NOSTAPLE;@PJL COMMENTOID_ATT_FINISHINGOID_VAL_FINISHING_BOOKLET@ PJL COMMENTOID_ATT_FEED_EDGEOID_VAL_FEED_EDGE_SHORT_TRAILING%%OID_ATT_BOOKLETOID_VAL_BOOKLET_NOSTAPLE;%%OID_ATT_FINISHINGOID_VAL_FINISHING_BOOKLET;%%OID_ATT_FEED_EDGEOID_VAL_FEED_EDGE_SHORT_TRAILING;/Booklet true/BookletDetails /Type 2 /Staples 0/LeadingEdge 2BOOKLET STAPLEThis command indicates staples for folded print jobs. Use with booklet fold commands above.PJL COMMENT Cmd DSC Comment Cmd PS Set Page@PJL COMMENTOID_ATT_BOOKLET_string;%%OID_ATT_BOOKLETOID_VAL_BOOKLET_string;/Booklet string/BookletDetails /Type 2 /Staple int/LeadingEdge 2Where string is:STAPLENOSTAPLEWhere string is true or falseWhere int is0 = Do not staple2 = 2 Staples