APPLICATIONSMAJESTIK 5760/5765 MATERIALS USAGE GUIDE 23ApplicationsThe sections that follow provide specific techniques which should beused for certain types of jobs in order to assure optimum feedingperformance and image quality.Duplex CopiesApplication Description & ExpectationsDuplex (two-sided) copying refers to imaging on the second side ofa copy already made on the 5760/5765 copier/printer. When usingthe recommended 24 to 28 lb bond papers, feeding performanceand image quality will be good, but may not equal the performanceand quality of side 1.Recommended MaterialsXerox 24 lb Image Series LX, 8.5 x 11” = 3R3874Xerox 24 lb Image Series LX, 11 x 17” = 3R3877Xerox 28 lb 4024 DP, 8.5 x 11” = 3R2353Xerox 28 lb 4024 DP, 11 x 17” = 3R3873Hammermill 28 lb Color Copy Paper, 8.5 x 11” = 10246-7Steps for Success1 Run the side that has the least image area (or the black and whiteside) first.2 Load the paper for side 1 in the Paper Tray Bypass. Do not loadmore than 25 sheets of paper.3 Load the side 1 imaged copies/prints into the Paper Tray Bypasswith the imaged side down. The paper should be rotated 180 or90 degrees from the side 1 position. (Example: Run the side 1lead edge as the side 2 trail edge, or feed side 1 long-edge feed,then side 2 short-edge feed. The document on the DocumentGlass should also be rotated 90 degrees in the latter case.)4 Run side 2 within 15 to 20 minutes of running side 1.5 When running large jobs of more than 25 copies, split the job intomultiple groups of 25 sheets maximum. That is, run 25 copies ofside 1, then run 25 copies of side 2.6 Heavy-weight papers (greater than 28 lb bond (105 gsm), coatedpapers, and transparencies should not be used for two-sidedcopying. Frequent jams and image quality problems are likelywith heavy-weight and coated papers. Duplexing oftransparencies will cause damage to the copier/printer.12 3. . .