Xerox DocuPrint C3120 DX User Manual

Also see for DocuPrint C3120 DX: User guide

Contents

Xerox DocuPrint C3120 DX User Manual Manual pdf 24 page image

Installation and Configuration on Windows 98/Me24[Output Settings] TabThe following explains how to configure the [Output Settings] tab.Setting ItemsJob Type - Sets the type of your print job to [Normal Print], [Secure Print], or [SampleSet].Normal Print - Prints a job without using the Secure Print or Sample Set feature.Secure Print - Temporarily stores a print job in the printer, rather than printing itimmediately, until you manually start the printing from the control panel.Sample Set - Allows you to print a proof copy of a multi-set job and prints the entiresets once the print result has been verified. If you set the print quantity to 1, thissetting automatically changes to [Normal Print].NOTE: To select [Secure Print], the [Options] tab > [RAM Disk] must be set to[Available]. To select [Sample Set], the [Options] tab > [RAM Disk] must be set to[Available] and the [Configuration] tab > [Collated] must be set to [On].User ID - Sets the user ID for the Secure Print or Sample Set feature with up to 8alphanumeric characters.Password - Sets the password associated with the user ID for the Secure Print feature.The password can be up to 12 alphanumeric characters. Asterisks (***) appear insteadof text as you enter the password in this text box.Retrieve Document Name - Sets the method of naming the document that will bestored in the printer using the Secure Print or Sample Set feature. [Auto Retrieve]automatically retrieves the document name from the application from which thedocument will be printed. If the name exceeds 12 alphanumeric characters, only thefirst 12 characters will be valid.